How To Work With Epoxy Cleanly & Efficiently

How To Work With Epoxy Cleanly & Efficiently

Do you want to convert the dull and plain-looking concrete floors of your residential or commercial spaces into stylish surfaces that’s tough-as-nails? If your current flooring system is in dire need of a makeover, you might want to consider sprucing it up with an epoxy Floor Coatings New York City. Over the years, epoxy floors have given homeowners and business owners the best bang for their buck. 

Epoxy Flooring Systems in Residential and Commercial Spaces

Epoxy floors are widely used in the garage because the material can stand up to chipping, surface abrasion, impacts, stains, gasoline, anti-freeze, oil, brake fluids, and other caustic car chemicals. Plus, it can instantly brighten up the garage space because of its light-reflective properties and creative designs. Furthermore, epoxy floors are also ideal for laundry rooms because of its moisture-resistant properties that protect the concrete from humidity, detergent spills, as well as wet clothes. Kitchen floors with epoxy coatings can also withstand lots of foot traffic and food spills. 

On the business side, epoxy flooring systems are used by various industries because of their strength, durability, anti-dusting properties, cleanliness, and resistance to potential hazards and harmful elements. Epoxy floors are commonly seen in warehouses, hangars, storage facilities, commercial kitchens, hospitals, auto shops, and laboratories. read more about epoxy maintenance tips and tricks at

How to Work with Epoxy Flooring Systems

First, you’ll have to choose the right type of epoxy that suits your needs. These resin-based paints are made up of two parts that are mixed together before application and they come in three different types – solid, solvent-based, and water-based.

How To Work With Epoxy Cleanly & Efficiently

Thoroughly Clean the Concrete Surface

If your concrete is newly applied, you’ll need to let it cure for at least 30 days before you can apply your epoxy coatings. For optimum curing, be sure to schedule a day of prep time to thoroughly clean, dry, patch, and smooth out the concrete subfloor. When removing hardened debris, use a scraper or a shovel with a flat edge and a vacuum. Oil stains and grease must be scrubbed off with the use of a stiff-bristled brush and a cleaning or degreasing solution. 

Wet the Flooring with Water

Before you can get the flooring ready for the scrubbing, you’ll need to hose it down with water. When every inch of your flooring is already wet, grab the power scrubber that has a degreaser and a brush attachment to work on 5-foot-square sections before using a squeegee to remove the flow of liquid on the surface. Next, use a wet/dry vacuum for removing the soapy water.

Prepare the Acid Etching Compound

In order to prepare the concrete surface for the application of the epoxy, it has to be microscopically roughened or etched by acid to increase the epoxy’s retention. You can prepare a mixture that can get the job done by mixing 12 ounces of muriatic acid and a few cups of water (preferably 5). Next, you can add the solution into a separate container with about a gallon of water in it. Be sure to mix the compound thoroughly before sprinkling it over a 10×10-foot area. 

Power-scrub the Area Then Etch

For about 10 minutes, power-scrub the 10×10-foot area and sprinkle the acid etching mixture. Repeat the process until every inch of the floor area is covered. Once done, be sure to flush all the acid residue by rinsing the floor three times and letting it dry overnight. 

Mix the Epoxy Coating

Next, you’ll need to measure the square footage of the concrete surface that you’re going to work on before calculating the amount of mixture that’s enough to cover the entire space. Keep in mind that at least two layers of epoxy coating are required. 

Apply the Epoxy Coating

Once you’ve mixed the resin and the hardening chemical together, you’ll only have about 2 hours to use it. Don’t worry, applying the epoxy coating onto the concrete is as easy as rolling paint on your walls. You’ll need a roller that’s nine inches wide to do the job. Next, follow the manufacturer’s instructions when you apply the first epoxy coating. 

To provide extra traction to your concrete surfaces, you have the option to add non-slip aggregates into the second coat of your epoxy flooring system. If you want to liven up your floors, you can also add color flakes some color flakes until you achieve your desired effect.